Joo eli formatoisin tossa joku aika sitten koneen ja koitin polttaa dvd-r levylle parit leffat. No metsäänhän se meni ja heti alkuunsa tuli Neron virhesanoma "Could not perform end of disc-at-once". Olisi tosi hienoa jos joku osaisi neuvoa että mistä tämä oikein johtuu ja miten asian saisi korjattua ?? On koitettu jo eri ohjelmilla ja neroakin asenneltu uudestaan. JA nyt kun tätä viestiä tässä kirjoittelen niin mistäkön mahtaa johtua koneesta kuuluva palohälytintä muistuttava ääni ? :D Kiitos jo etukäteen.
I used Nero Express to burn a movie that's already encoded into a Nero nrg image file for DVD-video. I keep getting an error message that says: Burn Failed. Could not perform end of Disc-at-Once.
You can read both my log file and Info Tool files below. I've burned other movies in the same fashion and same formats before with no problem.
Please help.
eaw
From: Nero Technical Support
________________________
Thank you for your e-mail.
This can be caused by the following:
1) Please contact the manufacturer of the recorder in order to get the latest firmware for your recorder.
An old firmware can cause compatibility problems as well as burn failures.
Firmware upgrades for your recorder are provided only by the Manufacturer of your recorder. All firmware upgrades and support for upgrading your recorders firmware must be provided by either the recorder manufacturer or the OEM you purchased your recorder bundle from. We can not assist you in this, sorry.
For example if you have a Yamaha Recorder, you would go to the www.yamaha.com website in order to obtain the latest firmware for your recorder and instructions on how to upgrade your recorders firmware. Same goes for all other recorder manufacturers, such as Sony, Pioneer, LG, etc...
To determine what kind of recorder you have, assuming you do not know for sure, you can use our Nero InfoTool to obtain this information. To locate the Nero Info Tool, follow the steps below.
For Nero Burning ROM 6 or Nero Express 6 go to:
'Start->All Programs->Nero->Nero ToolKit->Nero InfoTool'
For Nero Burning Rom 5.5 or Nero Express 5.5 go to:
'Start->All Programs->Ahead Nero->Nero ToolKit->Nero InfoTool'
Once Nero InfoTool is launched, make sure your recorder is selected in the top left of the window. Use the drop-down box located there to select your recorder or any recorder. Once selected, it displays the manufacturer as well as the model of the recorder you have. Be sure to make a note of this. Also, once you have your recorder selected, you can click on the 'DRIVE' tab and in the top right of this window you will see the current firmware version (among other information) you have on your recorder. Compare this version with the latest firmware provided by the manufacturer of your recorder and upgrade if available.
Legal disclaimer:
"Nero AG is not liable for firmware updates as these updates are not offered by Nero AG. All updates are performed at ones own risk. Nero AG will not be liable for the legality of the firmware."
2) Poor Media - Try more than one brand of media. For Example: TDK, Verbatim, Imation, Yamaha, HP, etc.
3) Poor IDE Cable or Incorrect cable - for higher end Recorders these days if you use the 40pin cable you can have all sorts of unusual symptoms. It would be best to use an ATA-133 80 wire cable.
4) Driver Conflicts - If you have another CD Recording software installed on your system, or had one installed, it's drivers could be conflicting with our software. This is rare for this symptom, but it does occur. Uninstall any other Recording software and make sure all it's drivers have been removed with it. Then reinstall Nero and make sure you have the latest version we have posted on our website at www.nero.com
5) Defective Recorder - The optical head on your Recorder may need cleaning or servicing. Or it's possible the Circuit board on your Recorder has an open Coil or blown diode or resistor. Any one of these could cause this. Only solution would be to send the drive in for service to the Recorder Manufacturer.
If you have any further questions, please don't hesitate to contact us again.
Best regards,
Nero Support
Ja sitten asiaan - vaihda poltto softa :o Suosittelen CDBurnerXP :tä (nimestään huolimatta toimii mainiosti myös Vistassa).
Kiitos neuvosta! ja tosiaan löysin uusimman firmware version ja päivitin sen, mutta ei siltikään onnistu. Kyllä nämä tietokoneet on välillä niin henkimaailman vehkeitä. :/
Lainaus, alkuperäisen viestin kirjoitti BliNit: Kiitos neuvosta! ja tosiaan löysin uusimman firmware version ja päivitin sen, mutta ei siltikään onnistu. Kyllä nämä tietokoneet on välillä niin henkimaailman vehkeitä. :/
NoNiiN... koitinpa heti perään uudestaan.. ja polttihan se tuon levyn ilman ongelmia. en sit tiedä et onko Sonyn levyissä jotain häikkää.. epäilen kyllä vahvasti. Eli siis kyl toi firmwaren päivitys vaan ongelmaan sittenki autto. Kiitos!