|
Eli asemani on Gigabyte dvd dual GO-W0404A malli, ja poltot epäonnistuvat, vaikka olen päivittäny Firmwaren ja kokeillu eri levyjä. Välillä onnistuu Prodyen levyillä kun 2x nopeudella polttaa, välillä ei. Sitten kokeiltu Bulkpaq printable 4xspeed kokeiltu 2 ja 4 nopeudella, ei kertaakaan noilla levyillä ole poltto onnistunut. Nyt tuli error 91% kohdalla. Taidan viedä asemani takuuseen, on noita levyjä jo menny ihan tarpeeksi piloille.
Laitan tänne loppuun vielä tuon Neron errorlogin jos siitä muka jotain apua olisi. Kommentoikaan joku.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'G:\Ohjelmat\Nero6\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16.12.2003 19:18:06
Nero version: 6.3.1.6
Recorder: <DVD DUAL GO-W0404A> Version: 0051 - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.3.1.6
Adapter driver: <d347prt> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8520B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : DVD DUAL GO-W0404A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8520B H: CDRom0
DVD DUAL GO-W0404A I: CDRom1
Generic DVD-ROM J: CDRom2
Generic DVD-ROM K: CDRom3
=======================
AutoRun : 0
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 359MB (368392kB)
Memory in use : 29 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.12.2004
===== Disc-Copy over image - 1st step : Copy to image ...
19:44:36 #1 Text 0 File Reader.cpp, Line 118
Reader running
19:44:36 #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running
19:44:36 #3 Text 0 File DVDCopy.cpp, Line 263
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2287664 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)
19:44:36 #4 Text 0 File DVDCopy.cpp, Line 355
Max -1 tracks of 1 allowed to copy
1: 0 - 2287664 = 2287664, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
19:44:36 #5 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media
19:44:36 #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 2287663 (508:22.13, 4468MB)
19:44:36 #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
19:44:36 #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
19:44:36 #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:44:36 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2287664 (2287664) = #2287664/508:22.14
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287664 blocks [ Image Recorder ]
--------------------------------------------------------------
19:44:36 #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4685443072, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2287664 | lead-out | 1 | 0x00 | 0x41
19:44:36 #12 Phase 120 File dlgbrnst.cpp, Line 1841
Creating the image for burning
19:44:36 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
19:55:21 #14 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 2287664 (22E830h), lenght 0 blocks
19:55:21 #15 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
19:55:21 #16 Phase 121 File dlgbrnst.cpp, Line 1841
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
19:55:24 #1 Text 0 File Reader.cpp, Line 118
Reader running
19:55:24 #2 Text 0 File Writer.cpp, Line 124
Writer DVD DUAL GO-W0404A running
19:55:24 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = '
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = '
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 390475776
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=508:22.14 ( 2287664)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\omat tiedostot\TempImage.nrg>
19:55:24 #4 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media
19:55:24 #5 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2287663 (508:22.13, 4468MB)
19:55:24 #6 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
19:55:24 #7 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: DVD DUAL GO-W0404A, Media type: DVD-R
Disc Manufacturer: Prodis - cS03
Disc Application Code: 64, Disc Physical Code: 193
19:55:24 #8 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:55:24 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2287664 (2287664) = #2287664/508:22.14
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287664 blocks [DVD DUAL GO-W0404A ]
--------------------------------------------------------------
19:55:24 #10 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [DVD DUAL GO-W0404A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4685135872, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2287664 | lead-out | 1 | 0x00 | 0x41
19:55:28 #11 Phase 32 File dlgbrnst.cpp, Line 1841
Simulation started at 4x (5 520 KB/s)
19:55:28 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
19:55:28 #13 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 14:10,833 (850833ms) -> OK
19:55:28 #14 Text 0 File DVDR.cpp, Line 1619
Recording mode: Sequential Recording Mode
19:55:28 #15 Text 0 File Mmc.cpp, Line 19864
Set BUFE: JustLink -> ON
19:55:28 #16 Text 0 File DVDR.cpp, Line 1760
Start write address at LBA 0
DVD high compatibility mode: Yes
19:55:28 #17 Text 0 File Cdrdrv.cpp, Line 8002
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
19:55:43 #18 Text 0 File Cdrdrv.cpp, Line 1289
19:55:43.814 - DVD DUAL GO-W0404A\H1 T1 : Queue again later
20:10:02 #19 Text 0 File WriterStatus.cpp, Line 115
<DVD DUAL GO-W0404A > start writing Lead-Out at LBA 2287664 (22E830h), lenght 0 blocks
20:10:03 #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
20:10:03 #21 Text 0 File DVDR.cpp, Line 1970
EndDAO: Last written address was 2287663
20:10:37 #22 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
20:10:37 #23 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
20:10:38 #24 Phase 33 File dlgbrnst.cpp, Line 1841
Simulation completed successfully at 4x (5 520 KB/s)
20:10:39 #25 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 4x (5 520 KB/s)
20:10:39 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
20:10:40 #27 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 14:10,833 (850833ms) -> OK
20:10:40 #28 Text 0 File DVDR.cpp, Line 1619
Recording mode: Sequential Recording Mode
20:10:40 #29 Text 0 File Mmc.cpp, Line 19864
Set BUFE: JustLink -> ON
20:10:40 #30 Text 0 File DVDR.cpp, Line 1760
Start write address at LBA 0
DVD high compatibility mode: Yes
20:10:40 #31 Text 0 File Cdrdrv.cpp, Line 8002
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20:10:47 #32 Text 0 File Cdrdrv.cpp, Line 1289
20:10:47.142 - DVD DUAL GO-W0404A\H1 T1 : Queue again later
20:23:39 #33 SCSI -1135 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02EB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x08
CDB Data: 0x2A 0x00 0x00 0x1F 0x5E 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x08
20:23:39 #34 CDR -1135 File Writer.cpp, Line 304
Write error
20:23:39 #35 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
20:23:40 #36 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
20:23:40 #37 Text 0 File DVDR.cpp, Line 1970
EndDAO: Last written address was 2055871
20:27:45 #38 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
20:27:45 #39 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
20:27:45 #40 Phase 38 File dlgbrnst.cpp, Line 1841
Burn process failed at 4x (5 520 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28.10.2003 12:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 28.8.2002 23:27:50 (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 22.8.2004 16:31:48 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Viestiä on muokattu lähettämisen jälkeen. Viimeisin muokkaus 19. joulukuuta 2004 @ 14:25
|
