|
Tämä ei löytäis mistään ajureita, et sais äänet pelaan.
Kortti vissiin integroitu, laitoin emon tiedot tähän jos
joku fiksumpi löytäs ne ...tanan ajurit jostain..
SiSoftware Sandra
Mainboard
Manufacturer : Pronix (Epox)
MP Support : 1 Processor(s)
MPS Version : 1.40
Model : Springdale-PE
System BIOS : 03/19/2004-Springdale-PE-6A79APAEC-00
Chipset : Intel 865/848 (Springdale)
System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 4
Maximum Installable Memory : 4GB
Bank0/1 - A0 : Empty
Bank2/3 - A1 : Empty
Bank4/5 - A2 : Empty
Bank6/7 - A3 : DIMM Synchronous SDRAM 512MB/64
Chipset 1
Model : Epox Computer Co Ltd 82865G/PE/P, 82848P DRAM Controller / Host-Hub Interface
Bus(es) : ISA AGP PCI IMB USB i2c/SMBus
Front Side Bus Speed : 4x 147MHz (588MHz data rate)
Maximum FSB Speed / Max Memory Speed : 4x 200MHz / 2x 200MHz
Width : 64-bit
IO Queue Depth : 12 request(s)
Chipset 1 Hub Interface
Type : Hub-Interface
Version : 1.50
Number of Ports : 3
Width : 8-bit
Full Duplex : Yes
Multiplier : 2/1x
Logical/Chipset 1 Memory Banks
Bank 6 : 256MB DDR-SDRAM 2.0-3-3-7 1CMD
Bank 7 : 256MB DDR-SDRAM 2.0-3-3-7 1CMD
Channels : 1
Speed : 2x 183MHz (366MHz data rate)
Multiplier : 5/4x
Width : 64-bit
Refresh Rate : 7.80µs
Performance Acceleration Technology : Yes
Power Save Mode : No
Fixed Hole Present : No
APIC 1
Version : 2.00
Multiplier : 1/2x
Maximum Interrupts : 24
IRQ Handler Engaged : Yes
Enhanced Support : Yes
Memory Module 1
Manufacturer : Transcend Information
Type : 512MB DDR-SDRAM
Technology : 16x(32Mx8)
Speed : PC3200U 2.5-3-3-8
Date of Manufacture : 25. joulukuuta 1999
Set Timing @ 200MHz : 2.5-3-3-8
Set Timing @ 167MHz : 2.0-3-3-7
Environment Monitor 1
Model : Winbond W83627(T)HF ISA
Version : 2.01
Mainboard Specific Support : No
Temperature Sensor(s)
Board Temperature : 28.0°C / 82.4°F
CPU Temperature : 46.0°C / 114.8°F td
Power / Aux Temperature : 35.0°C / 95.0°F
Cooling Device(s)
Auto Fan Speed Control : No
CPU Fan Speed : 3375rpm
Voltage Sensor(s)
CPU Voltage : 1.73V
Aux Voltage : 1.34V
+3.3V Voltage : 2.86V
+5V Voltage : 5.03V
+12V Voltage : 11.73V
-12V Voltage : -11.54V
-5V Voltage : -5.10V
Standby Voltage : 4.97V
Battery Voltage : 3.12V
AGP Bus(es) on Hub 1
Version : 3.00
Speed : 8x
Multiplier : 1/2x
Fast-Writes Enabled : Yes
Isochronous Mode Enabled : No
Addressing Enabled : 32-bit
Aperture Size : 256MB
PCI Bus(es) on Hub 1
Version : 2.20
Number of Bridges : 2
PCI Bus 0 : PCI (1/1x PCIClk)
PCI Bus 2 : PCI (1/1x PCIClk)
LPC Hub Controller 1
Model : Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
ACPI Power Management Enabled : Yes
Delayed Transaction Enabled : Yes
LPC Hub Controller 2
Model : Epox Computer Co Ltd 82801EB/ER (ICH5/ICH5R) SMBus Controller
USB Controller 1
Model : Epox Computer Co Ltd 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 2
Model : Epox Computer Co Ltd 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 3
Model : Epox Computer Co Ltd 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 4
Model : Epox Computer Co Ltd 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 5
Model : Epox Computer Co Ltd 82801EB/ER (ICH5/ICH5R) USB 2.0 EHCI Controller
Version : 2.00
Specification : 1.00
Interface : EHCI
Channels : 8
Companion Controllers : 4
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support : 64-bit
Legacy Emulation Enabled : No
System SMBus Controller 1
Model : Intel 801xx/63xx SMBus
Version : 0.02
Specification : 2.00
Advanced TCO Mode Enabled : No
Slave Device Enabled : Yes
PEC Support : No
Speed : 100kHz
Expansion Slot(s)
PCI0 (1h) : PCI 32-bit +5V PME Full-Length Available (Intel Corporation 82865G/PE/P, 82848P PCI-to-AGP Bridge)
PCI1 (2h) : PCI 32-bit +5V PME Full-Length Used
PCI2 (3h) : PCI 32-bit +5V PME Full-Length Available
PCI3 (4h) : PCI 32-bit +5V PME Full-Length Available
AGP (8h) : AGP 32-bit +5V Full-Length Used (ATI Technologies Inc Radeon 9550)
Port Connector
PRIMARY IDE : None - ATA / None
SECONDARY IDE : None - ATA / None
FDD : 8251 FIFO - Floppy Disk / None
COM1 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
COM2 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
LPT1 : Parallel Port ECP/EPP - DB-25 pin female / DB-25 pin female
Keyboard : Keyboard - PS/2 / PS/2
PS/2 Mouse : Mouse - PS/2 / PS/2
USB0 : USB - None / None
USB1 : USB - None / None
Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Tip 2546 : Large memory modules should be ECC/Parity.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
Että tämmöstä..
-SN-
|
