Lainaus:

---

My Panasonic DMR-E85H had exactly the same problem. Unable eject disc and continuous "self check". So I removed the top casing to gain access to the laser box. The cover of this is held by 4 screws but the forward two are covered by the top of the front casing so it is necessary to remove two small screws and slip over the clips holding in this front section and then pull it slightly forwards. This gives access to the two front screws of the laser box. After all 4 screws are removed it is then easy to remove the top and lift the disc off the spindle. Reassemble in reverse order - not forgetting the two tiny screws for the front section. Takes less than an hour to do this when you know how. I hadn't done anything like this previously but machine has been OK again for last six months or so.

---